Click here for brochure

S5-Dual MLD series (5k - 10kVA)
On-Line: 5kVA - 10kVA (1/1)
On-Line: 10kVA(3/1)

S5-Dual MLD is the perfect solution for mission critical applications which require the highest levels of reliability, availability and performance.

S5-Dual MLD is unique in that the UPS can be placed directly onto the floor or mounted in 19” rackmount cabinets. The UPS only occupy 4U in the 19” or 21” rack cabinets with optional 21” rack accessories. The range is available in 5000-6000-10000 VA modes.

SIMPLIFIED SINGLE AND PARALLEL INSTALLATION

• The UPS can be installed as a floor standing tower or 19” rackmount UPS
• The front panal digital display can be pulled out and rotated to suit the installation format
• The maximum parallel operation configuration is up to 4 units by interconnecting the RJ-45 connector on the rear panel

FULL DIGITAL SIGNAL PROCESSOR (DSP) CONTROL

• Double conversion true online technology (VFI) complies with EN60240-3, European Directives for True-on-Line Technology
• Reprogram the UPS to be a Frequency Converter for either 50Hz or 60Hz through front keypad configuration
• DSP controller’s built-in parameters and settings, such as UPS operation modes voltage configurations, synchronization frequency, bypass voltage tolerance and buzzer alarm status, can be modified through the LCD front panel
• Through intelligent self-diagnostics, faulty component can be rapidly pinpointed which enables your service technicians to repair the UPS very quickly
• High input power factor of 0.99 and low input current THD of <3%
• Start-up without mains (cold start)

SMARTFAN SPEED REGULATION WITH TEMPERATURE CONTROLLED
The cooling fan speeds are controlled according to load percentage and temperature to reduce noise levels and energy consumption.

LCD/LED MIMIC PANEL
A precise LCD/LED display provides real time status of all major system parameter and status such as operation modes, AC Input and Output Voltage, Frequency, Battery Voltage, Load Level, temperature & etc.

DUAL INPUT LOOPS
Optional input terminal connections for the bypass and rectifier are available in addition to the standard single-input connection.

ACCESSORIES OPTIONS

• Emergency Power-Off (EPO) enables users to perform one-touch emergency shutdown of the UPS remotely
• External Maintenance Manual Bypass ensures continuous supply of power to the critical load during service or periodical maintenance of the UPS system
• Galvanic Isolation Transformer module provides isolation between the input and the output of the UPS and various secondary voltage 110/115/120/ 208/220/230/240 Vac
• e-Batt automatically manages the End-Discharge voltage of the internal batteries according to the load and prevents the deep discharge of the batteries during a power failure with ultra low load conditions
• Hot Swappable Battery function allows users to easily replace the battery packs without interruption of the critical load
• Standard matching battery cabinets are available to extend the UPS runtime

CONNECTIVITY OPTIONS
In addition to the standard RS232, an internal 2nd RS232, USB, RS485, Dry Contact, or WEB/SNMP card provides isolated contacts for industrial and remote alarm applications.

ADVANCED COMMUNICATION
The UPS is equipped with monitoring/shutdown software. The software not only allows the control of the UPS and its scheduled shutdown when the utility power fails, but also allows the user to:

• Remotely testing of the major operating UPS functions
• Communicate via SNMP/WEB card
• Access UPS function via WEB