
Click here for brochure |
|
X3-HM series
HM 60-100 kVA
Double Conversion On-line
The X3 HM series includes the 60-80-100 kVA three/single-phase, and uses double conversion on-line technology (VFI) with an isolation transformer on the inverter output.
The load is powered continuously by the inverter with a filtered, stabilised and regulated sinewave supply. The input and output EMI filters considerably increase the immunity of the load to mains disturbances and surges, even on bypass.
X3 HM provides maximum protection for vital “mission-critical” networks, security applications (electromedical) and industrial applications thanks to its outstanding mechanical and electrical design.
X3 HM is supplied with UPSMon software as standard and can be remotely monitored. Additional battery extension packs allow the standard battery runtime to be extended up to several hours.
-
reliable, filtered, stabilised and regulated sinewave output (double conversion online technology VFI according to EN50091-3 specifications) with filters for atmospheric disturbance suppression
-
high reliability: IGBT technology, full microprocessor control with no-break static and manual bypasses, extremely high shortcircuit current (2.8In) to ensure compatibility with the most difficult transformer applications, lighting, drives and industrial processes), and an isolation transformer on the inverter output
-
maximum reliability and power availability – connect up to 6 units in parallel or N+1 redundancy, even of different power ratings
-
low input total harmonic distortion (<5%)
-
0.8 power factor makes Master Dialog suitable for powering ICT and industrial loads
-
high level diagnostics: event log with 128 messages, states, measurements and alarms – available from the built-in LCD in several languages
-
Simple to install:
–Capability to install the UPS into any distribution system
–Capability to separate the rectifier/bypass power networks and of powering these from two separate sources, without galvanic isolation (necessary on those UPS without an output transformer)
-
capability of regulating the output voltage (to offset voltage drops down long cable runs)
-
built-in automatic and manual battery test feature, battery deep discharge protection and temperature compensating charger
-
BACK FEED protection: to avoid energy feeding back into the mains supply should a fault occur
|