X6-MP series
On-Line: 100kVA - 200kVA (6-pulse)
On-Line: 100kVA - 800 kVA (12-pulse)
QUALITY POWER SUPPLY
EPI MP is an on-line, double conversion UPS of class VFI SS 111 in accordance with IEC EN 62040-3 with the Inverter output transformer inside, solution that is particularly suitable for high level applications where the immunity of the load from the mains is a real issue.
Available Version:
- MP (100-200 kVA) 25% THDi
- MP-Clean (100-200 kVA) 5% THDi
- 12MP (200-800 kVA) 5% THDi
- 12MP-Clean (200-800 kVA) 3% THDi
CLEAN INPUT
Thanks to the low input current distortion of up to 3% (12-pulse Clean version), EPI MP represents a load with sine wave input for the source reducing any interference to the other loads connected on the same busbar. For all versions the power factor is > 0,9, while the 12MP Clean version guarantees a power factor up to 0.95 even at partial loads. This means that it is unnecessary to oversize the connection cables and the rating of the upstream MT/BT supply transformers thereby reducing the installation and ownership cost.
MOTOR GENERATOR FRIENDLY
The low input current distortion, the high input power factor, the progressive start-up of the rectifier (settable) and the battery recharge inhibition makes MP ideal for use in conjunction with a smaller size generator set, in some cases close to the UPS rated power.
BATTERY CARE SYSTEM
MP includes the “Battery Care System” which manages the batteries in order to obtain best performances and prolonged operating life.
BATTERY RECHARGE CAPABILITY
MP is designed to supply the nominal load and recharge the batteries. At partial loads the spare power can be used to recharge the batteries, therefore MP can recharge batteries with 3 hours back ups time in only 10 hours.
FLEXIBILITY
MP Series is ON-LINE double conversion design but can also operate in:
- Smart Active
- Stand-by-Off, suitable for Emergency Escape Light (CSS – Central Supply System), as per standard EN50171.
All models can be used as frequency converter - 50/60Hz and vice versa.
EXPANDABILITY
The units can be connected in parallel - up to eight modules - to increase power availability or the redundancy. The single module or the system can be expanded at any time depending on the power demand without any impact on the initial investment. Thanks to the peculiarity of the “Hot System Expansion” feature, the additional unit can be connected in parallel while the other units are on-line and supplying regular power to the load. The new UPS in on-line and will receive the updated information automatically.
EASE OF INSTALLATION
Master Plus is compact with a foot print of only 0.64sqm for up to 200kVA system. Front access to internal assemblies and top panel ventilation make space allocation within confined data processing or plant rooms. MP can be placed against a wall as there is no requirement for rear or side panel access for maintenance or ventilation.
ADVANCED COMMUNICATION
MP Series is delivered with the EPI UPSMon Software package. The UPS is supplied with two RS232 outputs for remote monitoring and a wide range of communication cards.
APPLICATION
MP guarantees maximum protection and quality of power supply for any type of load and in particular for “mission critical” applications, security and electromedical systems, industrial processes and telecommunications.
|
